Conair 5000 Podręcznik Użytkownika Pobierz pdf (Strona 62)

Function

4-22 l Operation

Control Function Descriptions(continued)

Screen

SCREEN 58

SCREEN 59

SCREEN 60

ALARM ALARM

ACTION SETUP

REGEN TEMP DEVIATION

ON EDIT PASS EDIT

This is the alarm action and setup screen.

With the proper password, (see page 4-29,

screen 85) the Select Category button can

be pressed under Alarm Action or Alarm

Setup. Alarm Action screens can be used

to change whether an alarm is Off,

Passive, or Shutdown (screen 59). Alarm

Setup screens can be used to change alarm

setpoints and delay times. (screens 60-70)

This is an example of the Alarm Action

screens. With the proper password, (see

page 4-29, screen 85) some alarms can be

turned on or off by either pressing the

Select Category button under the word

Edit, or by pressing the Select Category

button under the word On or Off. Once

the word begins to blink, the (+) or (-)

keys will change the setting. The

“ENTER” key must be pressed to lock in

the value. The same sequence works for

the “Pass” or “Shut” words. “Pass” or

Passive means the alarm will not shut the

dryer down but the alarm will be logged in

the Dryer Diagnostics Alarm Log. A

“Shut” means Shutdown, in which case the

dryer would shut down if the alarm occurs.

This is an example of an Alarm Setup

screen that has a minimum or maximum

temperature. With the proper password,

(see page 4-29, screen 85, refer to

password) the temperature setpoint can be

changed as well as how long the dryer has

to stay at that temperature before alarming.

REGEN HIGH TEMP

250°F 1 SEC

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 170 171

Komentarze do niniejszej Instrukcji

Brak uwag