Conair FC-33 Podręcznik Użytkownika Pobierz pdf (Strona 20)

CF Series Granulators UGG003/0398

16 SERVICE

10. Check the knife clearance with a feeler

gauge. The clearance should be 0.20 -

0.30 mm, check at the outer edges of the

knives.

11. Install all the rotating knives.

12. Press the knife firmly into the knife attach-

ment.

13. Tighten the screws (A) with alternating

increased torque to 75 Nm.

NOTE! Granulators with open cutter Ð tighten the screws (A) with alter-nat-

ing increased torque to 220 Nm.

14. Check that each rotating knife can pass the rear fixed knife freely.

If any rotating knife can not pass freely Ð undo the screws (A) and press the

knife firmly into the knife attachment.

15. Check the clearance of each rotating knife with a feeler gauge The clearance

should be 0.20 - 0.30 mm, check at the outer edges of the knives.

Then install the front, fixed knife

16. Install the knife in the knife attachment.

17. Screw in the socket cap screws (C) and

tighten so that the support rule (D) lightly

supports the knife.

18. Press the knife firmly into the knife attach-

ment.

NOTE! The screws in the rear of the

knife attachment are bonded in place.

NOTE! The knife has a fixed position

and no adjustment may be done.

19. Tighten the screws (C), with alternating

tightening torque to 40 Nm.

20. Carefully check that all rotating knives

can pass the front fixed knife.

If any knife can not pass the front fixed

knife freely

Ð undo the screws (C) and press the knife firmly into the knife attachment.

21. Check the clearance of each rotating knife with a feeler gauge The clearance

should be 0.20 - 0.30 mm, check at the outer edges of the knives.

22. Re-check the tightening torque of all rotating knives (75 Nm; granulator

with open cutter 220 Nm).

23. Re-check the tightening torque of the front and rear fixed knives (40 Nm).

A, B

D C

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 57 58

Komentarze do niniejszej Instrukcji

Brak uwag

Conair FC-33 Podręcznik Użytkownika Strona 20

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Nie Conair FC-33