Conair FC-33 Podręcznik Użytkownika Strona 23

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 58
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 22
A
B
B
¥ Remove the granule bin.
¥ Undo the motor screws (A) lightly, 4 pcs.
¥ Adjust the belt tension by increasing/reducing the distance of the motor to the
cutter pulley, using the motor adjustment screws (B), 2 pcs.
¥ Tighten the motor screws (45 Nm torque)
¥ If the belt tension is adjusted, the belt need to be re-checked after 20 - 30 hours
at full load.
7.4 Lubrication
Cutter housing
The bearings in the cutter housing are permanently greased, and do not need greas-
ing in normal circumstances.
7.3 Transmission (continued)
UGG003/0398 CF Series Granulators
SERVICE 19
Przeglądanie stron 22
1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 57 58

Komentarze do niniejszej Instrukcji

Brak uwag